|
Exhibition
Schedule:
| Move-in： |
9th January -10th January 2007 (9：00 a.m.—17：30 p.m.) |
| Exhibiting Hours： |
11th January -12th January 2007 (9：00 a.m.—17：00 p.m.)
13h January 2007 (9：00 a.m.—15：00 p.m.) |
| Ending： |
13h January 2007 (15：00 p.m.—23：00 p.m.) |
Location：
Guangdong Modern International Exhibition Center (GDE) was founded in
December, 2000, covering a land space of 330, 000 square meters. At the
moment, there are 4 separate exhibition halls providing 150,000 square
meters indoor exhibition space, capable of holding 5,500 international
standard scheme booths. The Conference Center is able to provide 11 conference
rooms, with size ranging from 85 to 24000 square meters, simultaneous
interpretation system is available. The multipurpose conference room,
the largest one with 2,400 square meters is equipped with scalable stage,
is suitable to use for gala performance.
Participation Fees:
Standard Booth (3×3=9 m2) ： US＄1500/booth
Bare Ground (minimum 36 m2)： US＄180/ m2
Including one table, two chairs, two lamps
Products:
| 1 |
plastics injection moulding technology and machine, robot(draw-out), feeder and auxiliary equipment, mould and die and component part equipment |
| 2 |
extrude technology and machine: foam board, blown film/bag, profile, sheet, Circular loom, Lamination line, wire and cable, mix, palletizing, etc. equipments. |
| 3 |
plastics machine, rubber/tyre machine and fittings, testing and control instrument, surface treatment, after-treatment equipment, etc. |
| 4 |
Plastics blow moulding processing technology and machine: plastics extrude-blow moulding, injection-blow moulding, injection-strech-blow moulding, etc. processing technology and machines. |
| 5 |
Relative equipments and kinds of accessories: plastics bottle, mixer, feeder, dryer, crusher, chiller, shaker screen, pelletizer, speed reducer, mold temperature, ultrasonic welder, electromotor electrical master, liquid component, heater, screw/barrel, etc. accessory equipments.
ā |
| 6 |
Plastics packaging, gravure, intaglio, silk-screen, tampon transfer process, lettering, thermal transfer process, slicer, slitter, joint, sealing & cutting, bag-making, adhesive plaster, adhesive tape, etc. processing.
|
| 7 |
Plastics and rubber raw/auxiliary materials, additive, color masterbatch, etc., semi-/final-products
|
|
